ARANCIA INDUSTRIES LTD

Arancia for the Safest Inshore Surf Rescue Boats

SLNZ SLSA SLSGB RNLI USA DENMARK IRELAND HONG KONG BALI FRANCE GERMANY SWEDEN ITALY CE APPROVED

HAND BUILT FOR QUALITY PERFORMANCE & SAFETY

Services

Technical/ Maintenance

Recommended procedure for inflating Arancia IRBs 3 Hull Chambers

Locate a flat soft surface (lawn, deck or bit of carpet on concret floor) Unroll hull onto floor and fit Floor Boards, add a little air to chambers to assist assembly, do not walk on Hull fabric forLearn More »

Bridgport Metal Inflation Valves and CE Mark Identification Number

The new all metal Bridgeport valve core will fit into all Arancia IRBs, but will require a new urethane adaptor (supplied with the craft) for the pump and Pressure Gauge to fit into it.Learn More »

Maintenance - Hull Pressures

Under inflation or unequal pressure in Hull clambers can result in loss of boat speed/performance or excessive floor board loadings/stress. Recommended procedure for inflating AranciaLearn More »

Seasonal Start Boat Check

Deflate craft and remove floorboard assembly, clean floorboards with soapy water, then allow to dry standing up on rear edge.Reinflate craft, first checking the inflation valves still haveLearn More »

ARANCIA Pressure Gauge Field Calibration

Pressure gauges do not need much of a knock to go out of calibration or for the pointer to come off. You can roughly recalibrate the gauge by the following method. This procedureLearn More »

Arancia Halkey Valve Replacement

Have replacement valve body on hand ready to fit. Fit GRP Removal tool into Valve body mechanism and unscrew anti-clockwise. The internal nut must be held in place thru the hullsLearn More »

Gallery